- #PASSENGER VEHICLE INSPECTION OBD FULL#
- #PASSENGER VEHICLE INSPECTION OBD CRACK#
- #PASSENGER VEHICLE INSPECTION OBD WINDOWS#
#PASSENGER VEHICLE INSPECTION OBD WINDOWS#
All windows - check for approved safety glass or rigid plastic and condition.Windshield - check for presence and condition.
#PASSENGER VEHICLE INSPECTION OBD CRACK#
No crack of 11 inches long or longer is allowed if any part of the crack is within the area cleared by the windshield wiper.
Hazard warning/four-way flasher (1966 and newer).Side marker lamps, parking lamps, and additional flashing turning lamps mounted on the side of the vehicle are not inspected. This is an advisement only, and not cause for rejection.Īll lighting must be of an approved type and inspected for operation, proper mounting, and broken or missing lenses. Tire pressure - You will be informed if the vehicle's tire pressure in not within the manufacturer's recommendation.Tire condition - check for any fabric break or cut over the length or width of 1 inch, visible bumps, bulges or knots, and any restricted use designation on the tire.Tread depth - must be at least 2/32 inch when measured in two adjacent major tread grooves showing the most wear.Wheel fasteners - check for missing or broken parts.Chassis/frame - check for breaks, cracks, or severe rust at the suspension attachment points.Springs and torsion bars - check for sagging or broken springs, or a broken, disconnected, missing or bent torsion or stabilizer bar.Shock absorbers - check shock mountings and for broken or missing shock absorbers.Power steering - check operation, condition of belt, and for leakage.All steering linkages - check for tightness or binding, excessive wear and/or looseness in parts, including idler arm, center control arm, tie-rod ends, drag link ends, steering and pitman arms, gear box, cross shafts, bushings, wheel bearings, steering column or steering wheel shaft mounting.Steering wheel play - check for excessive freeplay.Steering, Front End, Suspension, Chassis, Frame and Wheel Fasteners Brake equalization - test vehicle for a straight stop without significant wheel pull.Parking brake - check for components and function.All brake lines and hoses - check for leaks, cracks, chafing, restrictions, and improper support.Wheel cylinders and/or calipers - check for leakage.Brake drums and/or rotors - check condition.Drum brake linings - thickness of linings must be at least 1/16 inch on bonded linings or at least 1/32 inch over rivet head on riveted linings, with no loose or missing rivets or lining.Brake master cylinder - check for leakage and proper fluid level.Power brake unit - check for proper operation.Brake pedal fade - brake must hold for one minute without fading.Brake pedal reserve - brake pedal must have 1/3 reserve.
This is an advisement only and not cause for rejection.Īt least one front wheel must be removed to inspect the brakes. You will be informed if the vehicle's air bag warning lamp is on or is not working. Your vehicle's Air Bag Warning Lamp will be checked for proper operation.
#PASSENGER VEHICLE INSPECTION OBD FULL#
It is a misdemeanor for an inspector to knowingly issue, or a motorist to knowingly accept, an inspection sticker unless a full and proper inspection has been performed. Your vehicle must then pass a new inspection, at an inspection station of your choice, before an inspection sticker will be issued. Your vehicle may be taken to any registered repair shop, or you may make the required repairs yourself. You are not required to have your vehicle repaired or re-inspected at the station that performed the initial inspection. If your vehicle fails the safety and/or emissions inspection, the inspection station must have your permission before beginning any repairs. The inspection must be done in a licensed inspection station displaying an official sign, and must be performed by a certified motor vehicle inspector. If an appointment is made, the station may require a deposit that cannot exceed the inspection fee. When a vehicle inspection is requested, an inspection station must inspect any vehicle it is licensed to inspect or must provide, in writing, an appointment date that is within eight working days. The inspection must be done before the expiration date of the current inspection sticker, and whenever the vehicle becomes registered in a different name. Motor vehicles are required, by law, to be in safe operating condition whenever they are driven on a public street or roadway in New York State.Įach vehicle registered in New York State must be inspected at least every 12 months. NEW YORK STATE VEHICLE INSPECTION REQUIREMENTS:
0 kommentar(er)
